This section describes how to set up the Ed-Fi ODS / API v7.0 in single/multi tenant mode. Before you proceed, make sure you have installed the prerequisites listed in Getting Started - Binary Installation.

Step 1. Download the Ed-Fi ODS / API Installer Packages

The Ed-Fi ODS / API installation packages can be downloaded from the following links:

Package Links

The required release packages to install the Ed-Fi ODS / API can be found at the links below. We recommend you stay current with the latest patch update that has been promoted to release.

• EdFi.Suite3.Installer.WebApi
• EdFi.Suite3.Installer.SwaggerUI (Optional, not for production)
• EdFi.Suite3.RestApi.Databases.5.0.0

For each of the downloads, right-click and select "Properties." Update the file extension (from .nupkg to .zip). Remove the version number (optional). Check the box next to Unblock (this will prevent PowerShell from asking for permission to load every module in the installer) and click OK.

Image RemovedImage Added

Step 2. Install the Ed-Fi Databases

Extract the contents of the EdFi.Suite3.RestApi.Databases package. The paths in these instructions assume that the package was extracted to a folder with the name of the package (e.g., C:\temp\EdFi.Suite3.RestApi.Databases).

Edit the configuration.json File

There are several settings in the configuration file that are left empty as they depend on whether you are opting of SQL Server or PostgreSQL backend. Update the settings by consulting the samples provided below.

 "ConnectionStrings": {
     "EdFi_Ods": "server=(local);trusted_connection=True;database=EdFi_{0};Application Name=EdFi.Ods.WebApi",
     "EdFi_Security": "server=(local);trusted_connection=True;database=EdFi_Security;persist security info=True;Application Name=EdFi.Ods.WebApi",
     "EdFi_Admin": "server=(local);trusted_connection=True;database=EdFi_Admin;Application Name=EdFi.Ods.WebApi",
     "EdFi_Master": "server=(local);trusted_connection=True;database=master;Application Name=EdFi.Ods.WebApi"
  },
  "InstallType": "SingleTenant",
  "ApiSettings": {
   "Engine": "SQLServer",
   ...
   "MinimalTemplateScript": "TPDMCoreMinimalTemplate",
   "PopulatedTemplateScript": "TPDMCorePopulatedTemplate"
  }

 "ConnectionStrings": {
     "EdFi_Ods": "host=localhost;port=5432;username=postgres;database=EdFi_{0};Application Name=EdFi.Ods.WebApi",
     "EdFi_Security": "host=localhost;port=5432;username=postgres;database=EdFi_Security;Application Name=EdFi.Ods.WebApi",
     "EdFi_Admin": "host=localhost;port=5432;username=postgres;database=EdFi_Admin;Application Name=EdFi.Ods.WebApi",
     "EdFi_Master": "host=localhost;port=5432;username=postgres;database=postgres;Application Name=EdFi.Ods.WebApi"
  },
  "InstallType": "SingleTenant",
  "ApiSettings": {
   "Engine": "PostgreSQL",
   ...
   "MinimalTemplateScript": "TPDMCorePostgreSqlMinimalTemplate",
   "PopulatedTemplateScript": "TPDMCorePostgreSqlPopulatedTemplate"
  }

"InstallType": "MultiTenant",  
"ApiSettings": { 
   "Engine": "SQLServer",
   "OdsTokens": "Tenant1ODS;Tenant2ODS"
   "Features": [
     ...
     {
        "IsEnabled": true,
        "Name": "MultiTenancy"
     },
     ...
   ]
},
"Tenants" : {
  "Tenant1": {
      "ConnectionStrings": {
        "EdFi_Security":  "server=(local);trusted_connection=True;database=EdFi_Security_Tenant1;persist security info=True;application name=EdFi.Ods.WebApi;encrypt=False",
        "EdFi_Admin":  "server=(local);trusted_connection=True;database=EdFi_Admin_Tenant1;application name=EdFi.Ods.WebApi;encrypt=False"
      }
    },
  "Tenant2": {
      "ConnectionStrings": {
        "EdFi_Security":  "server=(local);trusted_connection=True;database=EdFi_Security_Tenant2;persist security info=True;application name=EdFi.Ods.WebApi;encrypt=False",
        "EdFi_Admin":  "server=(local);trusted_connection=True;database=EdFi_Admin_Tenant2;application name=EdFi.Ods.WebApi;encrypt=False"
      }
    }
}

"InstallType": "MultiTenant",  
"ApiSettings": { 
   "Engine": "PostgreSQL",
   "OdsTokens": "Tenant1ODS;Tenant2ODS"
   "Features": [
     ...
     {
        "IsEnabled": true,
        "Name": "MultiTenancy"
     },
     ...
   ]
},
"Tenants" : {
  "Tenant1": {
      "ConnectionStrings": {
        "EdFi_Security":  "host=localhost;port=5432;username=postgres;database=EdFi_Security_Tenant1;application name=EdFi.Ods.WebApi;encrypt=False",
        "EdFi_Admin":  "host=localhost;port=5432;username=postgres;database=EdFi_Admin_Tenant1;application name=EdFi.Ods.WebApi;encrypt=False"
      }
    },
  "Tenant2": {
      "ConnectionStrings": {
        "EdFi_Security":  "host=localhost;port=5432;username=postgres;database=EdFi_Security_Tenant2;application name=EdFi.Ods.WebApi;encrypt=False",
        "EdFi_Admin":  "host=localhost;port=5432;username=postgres;database=EdFi_Admin_Tenant2;application name=EdFi.Ods.WebApi;encrypt=False"
      }
    }
}

"Plugin": {
    "Folder": "../../Plugin",
    "Scripts": [
    ]
  }

Run Installation Script

Open a PowerShell window in Administrator mode and navigate to the EdFi.Suite3.RestApi.Databases package folder.

Run the following PowerShell command to load modules for installation:

Import-Module .\Deployment.psm1

Next, execute the following command in PowerShell:

Initialize-DeploymentEnvironment

Step 3. Install WebApi

Extract the contents of the EdFi.Suite3.Installer.WebApi package. The paths in these instructions assume that the package was extracted to a folder with the name of the package (e.g., C:\temp\EdFi.Suite3.Installer.WebApi).

Prepare Installation script

Open a PowerShell window in Administrator mode and navigate to the EdFi.Suite3.Installer.WebApi package folder. Run the following PowerShell command to load modules for installation:

Import-Module .\Install-EdFiOdsWebApi.psm1

The WebApi installer can take a number of parameters to tailor the installation experience (more examples can be found in the Install-EdFiOdsWebApi.psm1 file). At a minimum, database connection info is required.

Copy and modify the following parameter code to fit your connection information:

$parameters = @{
    PackageVersion = "67.10.9012250"
    PackageName  DbConnectionInfo= "EdFi.Suite3.Ods.WebApi.Standard.5.0.0"
    DbConnectionInfo = @{
       Engine="SqlServer"
       Server="localhost"
       UseIntegratedSecurity=$true
    }
    UnEncryptedConnection = $true
}

$parameters = @{
    PackageVersion = "67.10.9012250"
    DbConnectionInfoPackageName = "EdFi.Suite3.Ods.WebApi.Standard.5.0.0"
    DbConnectionInfo = @{ 
       Engine="PostgreSQL" 
       Server="localhost" 
       Username="postgres"
    }
}

$parameters = @{
    IsMultiTenant = $true
    PackageVersion = "67.10.9012250"
    PackageName = "EdFi.Suite3.Ods.WebApi.Standard.5.0.0"
    DbConnectionInfo = @{
       Engine="SqlServer"
       Server="localhost"
       UseIntegratedSecurity=$true
    }
    TenantsUnEncryptedConnection = @{$true
    Tenants = @{
    	Tenant1 = @{
        	AdminDatabaseName = "EdFi_Admin_Tenant1"
            SecurityDatabaseName = "EdFi_Security_Tenant1"
        }
        Tenant2 = @{
            AdminDatabaseName = "EdFi_Admin_Tenant2"
            SecurityDatabaseName = "EdFi_Security_Tenant2"
        }
    } 
}

$parameters = @{
    IsMultiTenant = $true
    PackageVersion = "67.10.9012250"
    PackageName  DbConnectionInfo= "EdFi.Suite3.Ods.WebApi.Standard.5.0.0"
    DbConnectionInfo = @{ 
       Engine="PostgreSQL" 
       Server="localhost" 
       Username="postgres"
    }
    Tenants = @{
    	Tenant1 = @{
        	AdminDatabaseName = "EdFi_Admin_Tenant1"
            SecurityDatabaseName = "EdFi_Security_Tenant1"
        }
        Tenant2 = @{
            AdminDatabaseName = "EdFi_Admin_Tenant2"
            SecurityDatabaseName = "EdFi_Security_Tenant2"
        }
    }   
}

Paste the modified parameter code into your PowerShell window and hit Enter.

Run the Installation Script

Run the following command in the PowerShell window:

Install-EdFiOdsWebApi @parameters

Copy your extension plugin to deployed WebAPI

If you have an extension plugin package that you would like to be the deployed to Ed-Fi WebApi, place the extracted contents of your extension plugin package in C:\inetpub\Ed-Fi\WebApi\Plugin folder.

Image Removed

Enable your extension plugin in appsettings.json 

Open the appsettings.json file found in C:\inetpub\Ed-Fi\WebApi.

Edit the Plugin section of the configuration file and update the Folder and Scripts values to the following:

"Plugin": {
    "Folder": "./Plugin",
    "Scripts": [
    ]
  }

Step 4. Install Swagger

Extract the contents of the "EdFi.Suite3.Installer.SwaggerUI" package. The paths in these instructions assume that the package was extracted to a folder with the name of the package (e.g., C:\temp\EdFi.Suite3.Installer.SwaggerUI).

Prepare Installation Script

Open a PowerShell window in Administrator mode and navigate to the "EdFi.Suite3.Installer.SwaggerUI" folder. Run the following PowerShell command to load modules for installation:

Import-Module .\Install-EdFiOdsSwaggerUI.psm1

The Swagger UI installer can take a number of parameters to tailor the install experience (more examples can be found in the Install-EdFiOdsWebApi.psm1 file). At a minimum, WebAPI connection information is required.

Copy and modify the following parameter code to add your site name:

Paste the modified parameter code into your PowerShell window and hit Enter.

Run the Installation Script

Run the following command in the PowerShell window:

Install-EdFiOdsWebApi @parameters

"Plugin": {
    "Folder": "./Plugin",
    "Scripts": [
    ]
  }

Step 4. Install Swagger

Extract the contents of the "EdFi.Suite3.Installer.SwaggerUI" package. The paths in these instructions assume that the package was extracted to a folder with the name of the package (e.g., C:\temp\EdFi.Suite3.Installer.SwaggerUI).

Prepare Installation Script

Open a PowerShell window in Administrator mode and navigate to the "EdFi.Suite3.Installer.SwaggerUI" folder. Run the following PowerShell command to load modules for installation:

Import-Module .\Install-EdFiOdsSwaggerUI.psm1

The Swagger UI installer can take a number of parameters to tailor the install experience (more examples can be found in the Install-EdFiOdsWebApi.psm1 file). At a minimum, WebAPI connection information is required.

Copy and modify the following parameter code to add your site name:

$parameters = @{
    PackageVersion = "7.0.2249"
    WebApiVersionUrl = "https://YOUR_SITE_OR_SERVER_NAME_HERE/WebApi"
}

Paste the modified parameter into your PowerShell window and execute the code.

$parameters = @{
    PackageVersion = "7.0.2249"
    WebApiVersionUrl = "https://YOUR_SITE_OR_SERVER_NAME_HERE/WebApi"
	Tenants = @("Tenant1", "Tenant2")
	DefaultTenant = "Tenant2"
}

$parameters = @{
    PackageVersion = "

7.

0.

2249"
    WebApiVersionUrl = "https://YOUR_SITE_OR_SERVER_NAME_HERE

/WebApi"
    SchoolYears = @("2022", "2023")
    DefaultSchoolYear = "2023"
}

Run the Installation Script

Run the following command in the PowerShell window:

Install-EdFiOdsSwaggerUI @parameters

Step 5. Install Admin

API

The Admin App provides a graphical API provides an API-based programmatic interface for platform hosts to administer and manage non-sandbox instances of the Ed-Fi ODS / API. Follow the installation steps steps here.  Alternatively, Alternatively, ODS instances can be configured by database administrators via SQL queries as outlined in the article How To: Configure ODS Instances. API keys and secrets can be administered by database administrators via SQL queries as outlined in the article article How To: Configure Key / Secret.

Step 6. Restart your Website

Just a few more tasks to complete your installation: 

• Open IIS (Press the Windows key  on your keyboard, type IIS, select Internet Information Services (IIS), and press Enter.
• Right-click on the server (alternatively, you can right-click the EdFi web site), and select Stop.

• Right-click the server (or EdFi website) again and select Start.

You are now ready to use the Ed-Fi ODS / API. The following URLs are available: